BARTON Elite NATO? Style Watch Strap – 18mm, 20mm, 22mm or 24mm – Seat Belt Nylon Watch Bands


  • SELECT PROPER WIDTH: Available in 18mm, 20mm, 22mm and 24mm widths to fit thousands of watch models. To determine proper width for your watch, use a metric ruler to measure the lug width of your watch or the width of the current band at the point where it attaches. If your watch has an odd lug width (19mm, 21mm or 23mm), we recommend going with the strap 1mm larger than measured. The material is soft and should squeeze in nicely.
  • OPTIMAL LENGTH: All widths (18mm, 20mm, 22mm & 24mm) measure approximately 10.5 inches (270mm) in length not including the buckle and fit wrists from 5″ to 8″ in circumference. However, watch size and geometry also impacts fit. If band is initially longer than desired, fold free end neatly back into the keeper loop or cut to desired length. If trimmed, expose cut end to match or lighter flame to avoid fraying.
  • SEATBELT NYLON and BLACK PVD HARDWARE: Seatbelt style nylon weave 1.4mm in thickness. Perfect to fit the vast majority of watches while remaining lightweight, breathable and very sturdy. Buckle and loop fabricated from Black PVD. All materials are hypoallergenic.
  • LASER CUT, PREMIUM STITCHING, WATER PROOF and WASHABLE: Laser cut to eliminate fraying; Custom stitched with clean lines to provide styel and strength. Stink resistant and machine washable.

SKU: B08XZWLHK6 Category:


Product Description

watch on table top with watch band
NATO style strap with detail
NATO style strap color ways


Our Elite NATO Military Style straps are the top of the line when it comes to nylon watch bands. Crafted from premium seat belt weave nylon with custom stitching and 316L surgical grade stainless steel, these straps are waterproof, washable, and fit for all occasions.

Material: Seatbelt weave nylon, 1.4mm thickness

Hardware: 316L surgical grade stainless steel

Widths: 18mm, 20mm, 22mm & 24mm

Length: 10.5 inches (270mm) | Fits wrists from 5″- 8″ inches in circumference

Nato Strap

NATO Length



Refer to the diagram in the picture above. First, remove the original band and reinsert spring bars into the watch head (replacement spring bars sold separately if needed). Then, simply feed the leather strap between the spring bar and watch casing, behind the watch head, and up through the other spring bar. Run through the leather ring on the short strap to secure watch head. No need to remove spring bars (pins) to swap between different colors.


All of our standard straps are designed to fit wrists between 5 1/2 and 8 inches in circumference. However, the size and geometry of the watch will also impact fit.


These bands are compatible with any traditional watch that uses standard 18mm, 20mm, 22mm, or 24mm spring bars.

*If your watch has an odd lug width of 19mm, 21mm, or 23mm select the strap that is one mm wider. The strap will squeeze in nicely.


There are no reviews yet.

Be the first to review “BARTON Elite NATO? Style Watch Strap – 18mm, 20mm, 22mm or 24mm – Seat Belt Nylon Watch Bands”

Your email address will not be published. Required fields are marked *